Job Sheet-25M1730D_F2302-S9.wnc

Path : D:\sejong\model\2025\25m1730d\2302\2302_5\ Geometry : 25M1730D_F2302_250526.x_t.wnc P/G : M04960 Jun09.htm
X_Min : -123.506,          X_Set_A :   -128.506 Y_Max : 122.379,          Y_Set_A :   127.379 Z_Max : 15.000
X_Max : 123.893,          X_Set_A :   128.893 Y_Min : -84.872,          Y_Set_A :   -89.872 Z_Min : -248.003
X_Center : 0.194 Y_Center : 18.754
X_Length 247.40 Y_Length 207.25 Z_Length 263.00

images/basepart.png
      warning,,,,, XY Eccentric :X_Center : 0.19  ,Y_Center : 18.75 
..
---|Warning---Z_Max: : 15.00 ---
---|Warning---Z_Min : : -248.00 ---
---MC960 -25M1730D_F2302-S9.wnc Jun09.jpg---- , Programmer's Comment : 144H, SLIDE CORE
NCD Toolpath Type T_No Cutter Image D,¢± R_cn Holder Safe Tool Length Zmin
(R_cen) 		Stock Krpm Time
TOUCH
O2444 Optimized Planar Finishing 10 ToolpathCutterShape 20.99 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 41.50 -30.62 0.00 3.6 00:01
O2445 Optimized Planar Finishing 10 ToolpathCutterShape 20.99 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 60.10 -59.08 0.00 3.6 00:00
O2446 Optimized Planar Finishing 10 ToolpathCutterShape 20.99 1.00 R:1.00 Bull-nose, B03-BT50_HF20-165H-SRS 60.30 -59.29 0.00 3.6 00:00
-
O2448 Z-Level Finishing 11 ToolpathCutterShape 10.00 0.20 R:0.20 Bull-nose, B02-BT50_SSF10S_225N-SRS 6.50 0.00 0.00 4.8 00:02
O2449 Flat Surface Finishing 11 ToolpathCutterShape 10.00 0.20 R:0.20 Bull-nose, B02-BT50_SSF10S_225N-SRS 6.30 0.05 (W) 0.10 (E) 0.05 4.8 00:00
O2450 Z-Level Finishing 12 ToolpathCutterShape 9.98 1.00 R:1.00 Bull-nose, B02-BT50_SSF10S_225N-SRS 6.50 0.00 0.00 5.2 00:02
O2451 Flat Surface Finishing 12 ToolpathCutterShape 9.98 1.00 R:1.00 Bull-nose, B02-BT50_SSF10S_225N-SRS 6.50 0.00 (W) 0.00 (E) 0.00 5.2 00:00
O2452 On-curve Engraving 13 ToolpathCutterShape 2.00 R:1.00 Ball-end, B02-BT50_SSF04S_225N-SRS 2.00 14.86 0.00 7.9 00:00
-
Centering 24 ToolpathCutterShape 10.00 R:0.00 Centering, T02-BT50_Slim-Chuck-155-SRS 2.80 13.20 0.00 1.8 00:00
Drilling 31 ToolpathCutterShape 10.60 R:0.00 Drill, T01-BT50_Drill-Chuck-130-SRS 29.00 -12.98 0.00 0.4 00:02
Centering 23 ToolpathCutterShape 16.00 R:0.00 Centering, A05-BT50_C16-165S-SRS 3.30 12.70 0.00 2.3 00:00
Tapping 22 ToolpathCutterShape 12.00 R:0.00 Tapper, T03-BT50_Tap-Chuck-SRS 25.00 -9.00 0.00 0.1 00:00
44 45 46 48 49 50 51 52 53.1 53.2 53.3 53.4, Selected : 21081.50mm Total Time : 00:08
(Each-PP) : 55_G155 ¡Ù¡Ù [ VM960 ] ¡Ù¡Ù ,   Saved File Name : M04960 1Jun09.htm, Save time : 16:41:29 , Saved Counter : 1
Concatenated Postprocessor
No. CC_NCD Postprocessor Toolpath List: Length:
Total 		Time:
Total
1 O0201 55_G155==[ Drill / Tap ]== 53.1 53.2 53.3 53.4 640.00 00:00
---Sort By Tool_NO--- Se Jong Precision Machinery Co. LTD, Tel : 031 666 1325, Fax : 031 666 1327 ---EnLarge Image---